Info Menu; Software - Pce Instruments Pce-Les 103 Bedienungsanleitung

5.4.7 Auto Display Off menu
The Auto Display Off menu can be accessed from the settings menu by selecting it with the
Up/Down keys and pressing the OK key once "Auto Display Off" has been selected. To go back
to the settings menu, press the Back key. Press the Quick key to go back to the main screen.
The Auto Display Off menu allows you to select a time after which the device reduces the TFT
brightness to increase the operating life by reducing the power consumption. You can select 30
seconds, 60 seconds, 90 seconds or disabled. You can see an orange tick next to the currently
selected option. Use the Up/Down keys to select the desired option and once it is highlighted in
orange, press the OK key to confirm and save the selection.
5.5

Info menu

The Info menu can be accessed from the main menu by selecting it with the Up/Down keys and
pressing the OK key once "Info" has been selected. To go back to the main menu, press the Back
key. Press the Quick key to go back to the main screen.
The Info menu shows the device name, firmware version and PCE Instruments contact details.
5.6

Software

An update software is available here:
win_4.htm. This can be used to update the firmware of the device in case a new version is
released. To do that, connect the device to a PC running the software via USB, then power up
the device in boot/update mode. This means when the device is powered on in common
operation, press both the Power and MENU keys at the same time. Then first release the Power
key and then the MENU key. The device will then be working in boot mode, so the firmware can
find it and update the firmware with a .hex file supplied by us.
Figure 52. Auto Display Off menu
https://www.pce-instruments.com/english/download-
© PCE Instruments
40