Operation; Power The Device On/Off - Pce Instruments Pce-Les 103 Bedienungsanleitung

5

Operation

5.1

Power the device on/off

To turn on the device, press and hold the Power key for approx. 2 seconds. First, you will see the
power on screen (figure 2) and after 2 seconds, the device will show the main screen (figure 3)
and will be ready to use.
Figure 28. Power on screen
Figure 29. Measurement screen
After turning it on, the device will load the last configuration values used as well as the frequency,
duty cycle and phase shift values selected the last time it was used.
To turn off the device, press and hold the Power key. A countdown will be displayed as long as
the Power key is pressed. When the countdown reaches 0, the device will turn off.
© PCE Instruments
27