Interfaces; Display - Pce Instruments Pce-Les 103 Bedienungsanleitung

3.2

Interfaces

At the bottom side of the device, there is a USB-C type connector. This connector is used to
charge the internal battery of the meter and can also be used to update its firmware by means of
our update software
instruments.com/english/download-win_4.htm
3.3

Display

10. Date
11. Time
12. Battery status
13. Flash frequency unit
14. Flash duration value
15. Phase shift value
16. Phase shift icon
17. Flash duration icon
18. Flash frequency value
Figure 27. USB charging connection
which can be
© PCE Instruments
25
downloaded here: https://www.pce-