PCE Instruments PCE-LES 103 Bedienungsanleitung Seite 37

Figure 41. Phase Shift explanation
To modify the phase shift unit, select "Units", using the Up/Down keys. Once the line is highlighted,
press OK and a submenu will be displayed.
Figure 42. Phase Shift - Units
An orange tick can be found next to the phase shift unit the device is using at the moment. Use
the Up/Down keys to select the desired unit (degree or time) and press OK to set the unit.
You can go back to the phase shift menu by pressing the Back key. To go directly to the main
screen, press the Quick key.
© PCE Instruments
34