Elektrische Eigenschaften; Pm5D/Pm5D-Rh - Yamaha DSP5D Bedienungsanleitung

Elektrische Eigenschaften

PM5D/PM5D-RH

All faders are nominal when measured. Output impedance of signal generator:150ohms
❏ Frequency Response
Input Output
STEREO A,B
MIX OUT
MATRIX OUT
INPUT 1-48
MONITOR OUT
CUE OUT
PHONES
STEREO A,B
2TR IN ANALOG 1,2
MONITOR OUT
❏ Gain Error
Input Output
INPUT 1-48 STEREO A,B
2TR IN ANALOG 1,2 STEREO A,B
STEREO A,B
MIX OUT
MATRIX OUT
Internal OSC
MONITOR OUT
CUE OUT
PHONES
❏ Total Harmonic Distortion
Input Output
INPUT 1-48 STEREO A,B
2TR IN ANALOG 1,2 STEREO A,B
STEREO A,B
MIX OUT
MATRIX OUT
Internal OSC
MONITOR OUT
CUE OUT
PHONES
* Total Harmonic Distortion is measured with a 18 dB/octave filter @80 kHz
❏ Total Harmonic Distortion
Input Output
INPUT 1-48 STEREO A,B
2TR IN ANALOG 1,2 STEREO A,B
STEREO A,B
MIX OUT
MATRIX OUT
Internal OSC
MONITOR OUT
CUE OUT
PHONES
* Total Harmonic Distortion is measured with a 18 dB/octave filter @80 kHz
* GAIN Max. = –60 dBu (PM5D), –62 dBu (PM5D-RH)
Fs= 44.1 kHz or 48 kHz @20 Hz–20 kHz, referenced to the nominal output level @1 kHz
Fs= 88.2 kHz or 96 kHz @20 Hz–40 kHz, referenced to the nominal output level @1 kHz
RL
600Ω
PM5D: GAIN: Max., PAD: Off
PM5D-RH: GAIN: Max.
8Ω
600Ω
@1 kHz
RL
PM5D: Input Level: –60 dBu, GAIN: Max., PAD: Off
PM5D-RH: Input Level: –62 dBu, GAIN: Max.
600Ω
PM5D: Input Level: +10 dBu, GAIN: Min., PAD: On
PM5D-RH: Input Level: +10 dBu, GAIN: Min.
600Ω Input Level: +4 dBu
Full Scale Output
600Ω
Full Scale Output, MONITOR Level Control: Max.
Full Scale Output, CUE Level Control: Max.
8Ω –30 dBFs, PHONES Level Control: Max.
Fs= 44.1 kHz or 48 kHz
RL
PM5D: +4 dBu @20 Hz–20 kHz, GAIN: Max., PAD: Off
PM5D-RH: +4 dBu @20 Hz–20 kHz, GAIN: Max.
600Ω
PM5D: +4 dBu @20 Hz–20 kHz, GAIN: Min., PAD: On
PM5D-RH: +4 dBu @20 Hz–20 kHz, GAIN: Min.
600Ω +4 dBu @20 Hz–20 kHz
Full Scale Output @1 kHz
600Ω
Full Scale Output @1 kHz, MONITOR Level Control : Max.
Full Scale Output @1 kHz, CUE Level Control: Max.
8Ω Full Scale Output @1kHz, PHONES Level Control: Max.
Fs=88.2 kHz or 96 kHz
RL
PM5D: +4 dBu @20 Hz–40 kHz, GAIN: Max., PAD: Off
PM5D-RH: +4 dBu @20 Hz–40 kHz, GAIN: Max.
600Ω
PM5D: +4 dBu @20 Hz–40 kHz, GAIN: Min., PAD: On
PM5D-RH: +4 dBu @20 Hz–40 kHz, GAIN: Min.
600Ω +4 dBu @20 Hz–40 kHz
Full Scale Output @1 kHz
600Ω
Full Scale Output @1 kHz, MONITOR Level Control : Max.
Full Scale Output @1 kHz, CUE Level Control: Max.
8Ω Full Scale Output @1kHz, PHONES Level Control: Max.
PM5D/PM5D-RH V2 / DSP5D Bedienungsanleitung
Conditions
Conditions
Conditions
Conditions
Min. Typ. Max. Unit
–1.5
0.0 0.5 dB
–3.0
–1.5
Min. Typ. Max. Unit
2.0 4.0 6.0
2.0 4.0 6.0
dBu
23.5 24.0 24.5
–0.5 0 0.5
Min. Typ. Max. Unit
0.1
0.05
0.05
%
0.02
0.2
Min. Typ. Max. Unit
0.1
0.12
0.05
0.05
%
0.02
0.2
389
Referenzteil