Dsp5D - Yamaha DSP5D Bedienungsanleitung

DSP5D

❏ Frequency Response
Input Output
INPUT 1-48
OMNI OUT 1-24
ST IN 1-4
❏ Gain Error
Input Output
INPUT 1-48
OMNI OUT 1-24
ST IN 1-4
Internal OSC
❏ Total Harmonic Distortion
Input Output
INPUT 1-48
OMNI OUT 1-24
ST IN 1-4
Internal OSC
* Total Harmonic Distortion is measured with a 18 dB/octave filter @80 kHz
❏ Total Harmonic Distortion
Input Output
INPUT 1-48
OMNI OUT 1-24
ST IN 1-4
Internal OSC
* Total Harmonic Distortion is measured with a 18 dB/octave filter @80 kHz
❏ Hum & Noise
Input Output
INPUT 1-48
OMNI OUT 1-24
ST IN 1-4
All INPUT
—
* Hum & Noise are measured with a 6 dB/octave filter @12.7 kHz; equivalent to a 20 kHz filter with infinite dB/octave attenuation.
Fs= 44.1kHz or 48 kHz @20 Hz-20 kHz, referenced to the nominal output level @1 kHz
Fs= 88.2 kHz or 96 kHz @20 Hz-40 kHz, referenced to the nominal output level @1 kHz
RL
600Ω GAIN: Max.
Fs= 44.1 kHz, 48 kHz, 88.2 kHz or 96 kHz@1 kHz
RL
Input level: –62 dBu, GAIN: Max. → Output level: +4.0 dBu (Typ.)
Input level: +10 dBu, GAIN: Min. → Output level: +4.0 dBu (Typ.)
Input level: –62 dBu, GAIN: Max. → Output level: +4.0 dBu (Typ.)
600Ω
Input level: +10 dBu, GAIN: Min. → Output level: +4.0 dBu (Typ.)
Full scale output, Output level: +24.0 dBu (Typ.)
Fs= 44.1 kHz or 48 kHz
RL
+4 dBu @20 Hz–20 kHz, GAIN: Max
+4 dBu @20 Hz–20 kHz, GAIN: Min
600Ω +4 dBu @20 Hz–20 kHz, GAIN: Max
+4 dBu @20 Hz–20 kHz, GAIN: Min
Full scale output @1 kHz
Fs= 88.2 kHz or 96 kHz
RL
+4 dBu @20 Hz–40 kHz, GAIN: Max
+4 dBu @20 Hz–40 kHz, GAIN: Min
600Ω +4 dBu @20 Hz–40 kHz, GAIN: Max
+4 dBu @20 Hz–40 kHz, GAIN: Min
Full scale output @1 kHz
Fs= 44.1 kHz, 48 kHz, 88.2 kHz or 96 kHz, EIN=Equivalent Input Noise
RL
Rs= 150Ω, GAIN: Max
Master fader at nominal level and one Ch fader at nominal level.
(When controlled by PM5D or PM5D Editor)
Rs= 150Ω, GAIN: Min
Master fader at nominal level and one Ch fader at nominal level.
(When controlled by PM5D or PM5D Editor)
Rs= 150Ω, GAIN: Max
Master fader at nominal level and one Ch fader at nominal level.
600Ω
(When controlled by PM5D or PM5D Editor)
Rs= 150Ω, GAIN: Min
Master fader at nominal level and one Ch fader at nominal level.
(When controlled by PM5D or PM5D Editor)
Rs= 150Ω, GAINs: Min
Master fader at nominal level and all ch1-48 in faders at nominal level.
(When controlled by PM5D or PM5D Editor)
Residual output noise, ST master off.
PM5D/PM5D-RH V2 / DSP5D Bedienungsanleitung
Conditions
Conditions
Conditions
Conditions
Conditions
Min. Typ. Max. Unit
–1.5 0.0 0.5 dB
Min. Typ. Max. Unit
–2.0 0 +2.0
–2.0 0 +2.0
–2.0 0 +2.0 dB
–2.0 0 +2.0
–0.5 0 +0.5
Min. Typ. Max. Unit
0.1
0.05
0.1 %
0.05
0.02
Min. Typ. Max. Units
0.12
0.05
0.12 %
0.05
0.02
Min. Typ. Max. Unit
–128
EIN
–62
–81 –76
–128
EIN
dBu
–62
–81 –76
–62
–86
391
Referenzteil