OPERATION WITH THE REMOTE COMMANDER
Once the POWER
button
and ON
button
have been
pressed, you
can remotely control the recorder with this commander
up to 10
meters
away
from
the recorder
and
within
the range
illustrated
below.
Remote control detector
Switched
on in advance
Notes on the remote commander
@ Keep the commander away from extremely hot or humid places.
@ Avoid dropping any foreign objects into the commander cabinet,
particularly when replacing batteries.
52
BATTERY INSTALLATION
The Sony Remote Commander RMT-200 (supplied) operates on four
AA batteries (supplied).
To
install
batteries
into
the
Commander,
proceed
as
follows:
@ Press and slide to open the battery compartment lid.
@
Install the four size AA batteries supplied
(IEC Battery Desig-
nation R6) in the battery compartment.
Be sure to observe cq
yt
polarity.
"
©
Close the lid.
@
In normal
operation,
battery
life is about
a year.
When
the
battery is exhausted,
the remote
commander
will not operate the
recorder
properly.
When
this happens,
replace the batteries with
new ones.
@ When the commander is not used for along period of time, remove
the batteries to avoid damage from possible battery leakage.