Sony SL-C7E Bedienungsanleitung Seite 42

CHANNEL PRESETTING
Location of controls
Tuning indicator.
TEST SIGNAL
TEST SIGNAL switch
Band indicator lamps
AFT/FINE tuning switch
CHANNEL SEARCH buttons
SEARCH ON/OFF button/lamp
AUTON ATIC
PROGRAIIMING
AUTOMATIC
PROGRAMMING
button
(A) To preset all the receivable VHF and UHF channels
With the automatic programme search system, receivable channels
sequence; from the channel with the lowest frequency to the channel
in your area can be preset to the channel select buttons in numerical
with the highest.
Press channel select button "1" ''1" will appear in the channel indicator.
@ |f the number '1' does not appear, check that the INPUT SELECT switch at the
front panel is set to TUNER.
Open the
lid to expose
the presetting
controls.
Set the AFT switch to ON.
Press the AUTOMATIC PROGRAMMING button. Automatic programming will begin...
The channel with the lowest frequency will be memorized on the channel select
button "1". This tuning and memorizing procedure will be repeated in sequence
until no more channels can be found.
Press the SEARCH ON/OFF button. The corresponding lamp will light.
The channel number display in the channel indicator will blink indicating that the
recorder is in search mode.
When the automatic channel presetting is completed, press the SEARCH ON/OFF
switch to release the channel search mode (OFF). The lamp will go off.
42