Sony SL-C7E Bedienungsanleitung Seite 50

PROGRAMMING EXAMPLES
In the following examples, day select button "1" is Monday.
(A) To programme Wednesday at 10:30 to 12:00, channel 1, on PROGRAM button "3"
Press PROGRAM button 3,
and hold it down.
Press
Press day select Hs ua Press TURN 2 be
ress ress Press Channel 1.
button 3. 10MIN, —> 3 OFF TIME button. 10MIN, ——> 0
MIN ——> 0 MIN ———> 0
buttons. buttons.
Release .
¢
!
Press
@ The timer will trigger a recording every Wednesday at 10:30 to 12:00 if the programming is made on PROGRAM
button '1'. PROGRAM button ''1" is the only button that can trigger a recording on every subsequent week.
(8)Programming everyday at 17:30 to 18:00, Channel 6, on the PROGRAM button "2"
Press PROGRAM button 2,
and hold it down.
Press
H,-———> 17
10MIN,—> 3
MIN———> 9
buttons.
Set the turn-on
day for everyday.
To sum up the programming procedure:
1) Setting for everyday can be made on any PROGRAM buttons, as
in our previous example ®) :
In this case, the NEXT WEEK button is ineffective.
2) Setting for one day can be made on PROGRAM button 2, 3 and 4.
Any settings (day(s), time, channel) will be cleared from the memory
after the recording is finished. As in our previous example @).
this week next week
SE eee ee
Today
If the NEXT WEEK button is pressed, the turn-on day will be one week
later than that day in the present week.
; the week
this week next week after next
Today
50 -
Press TURN
OFF TIME button
Release
I SE TREE x
onig
pas
"n
Press
A, 18
10MIN, -——> 0
MIN-——-> 0
buttons.
Press Channel 6.
3) Setting for one day, beginning with this week, and continually
each week should be made on PROGRAM button 1.
the week
this week next week after next
Today
If the NEXT WEEK button is pressed, the recording will start and
stop on the day set a week later than that day in the present week,
turn on and off on that day at that time every week after that.
the week
this week next week after next
| |
Today
Once the setting is finished on each PROGRAM button, and the
TIMER button is depressed, the lamp associated with the PROGRAM
button will light. If the lamps blink, the time and day settings on two
PROGRAM buttons overlap.
For example: PROGRAM button 1 on Wednesday 8:30 to 9:30
PROGRAM button 2 everyday 8:45 to 9:00
If this happens, reset the timer settings.