Assa Abloy effeff 843ZY Installations- Und Montageanleitung Seite 26

Intended use
The 843ZY door bolt is an electrically operated magnetic bolt for additional
locking of a swing door in a dry environment in private or commercial use. For the
intended function of the door bolt, the accompanying striking plate must be
mounted with a magnet for detecting the opening status of the door.
The electrical installation and mounting must be carried out by specialist
tradesmen from the relevant trade or trained persons.
The door bolt can be mounted in a suitably milled or sawn lock pocket. The door
bolt can also be surface-mounted with the accessories offered by ASSA ABLOY
Sicherheitstechnik. On glass doors, the door bolt must be surface-mounted in a
suitable surface-mounted casing.
The door bolt can be mounted vertically or horizontally in the door leaf or door
frame. If the bolt is mounted in the door leaf, the cables must be routed via a
suitable cable bushing.
The door bolt must not be mounted in the floor due to the risk of tripping. When
mounting on the bottom of the door leaf, the striking plate must be mounted
sunk into the ground.
The device is suitable for use at doors and in environments without special safety
requirements regarding life and injury hazards.
The bolt does not have VdS certification and is therefore unsuitable as a blocking
element for burglary alarm systems, for example.
The 843ZY door bolt is only available for fail-locked operation.
The device is suitable for installation and use as per these instructions. It is not
intended for any other type of use.
EN
26 Functions