AsViva T16 Benutzerhandbuch Seite 20

ASSEMBLY INSTRUCTION
Step 2: Use the (9) (11) in the tool kit respectively to install the parts (4)(5)(6)(7) in the holes shown in
the drawing. The left and right sides are symmetrical, and the installation method is the same. Then
remove the packaging fixed plate under the running plate and store it for subsequent transportation.
Step 3
Use your foot to lower the treadmill as shown in the figure, and the treadmill will slowly land on the
ground. Use the wrench (9) from the toolkit to install the parts (4)(5) in the holes as shown in the dra-
wing, and install them symmetrically.
Note that when performing this step, please do not let children around to avoid being crushed or hit.
38
ASSEMBLY INSTRUCTION
Step 4
Install handrail cover. Use (11) wrench to drive the four screws (8) into the (2) and (3) holes and install
them respectively in the holes shown in the drawings.
Step 5
Put the safety key on the Console.
39