Swiss Pro+ SP-DISHM Bedienungsanleitung Seite 8

Installation guide
Unpacking
Unpack the outer carton, foam pad and plastic bag.

Unpack the dish rack and in the meantime take out the accessories

Place the dish rack back properly

Tips: Each device was tested and packed well before leaving the factory to ensure the quality The
bend of the internal pipeline can leave water behind. If this item is loaded upside down during
transportation, water drops will remain.
Positioning the appliance
1. Position the appliance in the desired location. Provide a height of more than 50CM. Leave a
distance of more than 5CM on the four sides. The dishwasher is equipped with water inlet hoses
and drain hoses that can be positioned to the right or left to facilitate proper installation.
2. Keep the appliance more than 30CM away from a gas stove or other heat sources.
3. To make water supply or drainage easy, please place this appliance on the cabinet or table.
4. Do not place this appliance in the following places:
- Places with direct sunlight;
- Frozen places;
- Uneven and unstable places.
8