Swiss Pro+ SP-DISHM Bedienungsanleitung Seite 17

Knocking sound coming from inlet valves
This is caused by the way the water pipes are laid and does not affect the operation of the

appliance. There is no solution for this.
Remove any rinse aid spills with a cloth as this can lead to excessive foaming during the next

washing cycle.
With the dishes, cutlery, etc.
Food scraps are stuck to the plates, cutlery, etc.
Dishwasher was not sorted properly. Water jets could not reach all parts of the dishes, etc.

Too many items in the rack.

Items in the rack are touching each other.

There is not enough detergent added to the dishwasher.

Selected washing program was not intensive enough.

Rotation of spray arm was hindered by contents.

Nozzles in spray arm are clogged with food residue.

Filters are blocked.

Filters are incorrectly mounted.

Waste water pump has jammed.

Plastic items are discoloured
There is not enough detergent added to the dishwasher.

Detergent has insufficient bleaching properties. Use a detergent that contains a chemical

bleach.
White marks remain on dishes and glasses have a milky appearance
There is not enough detergent in the dispenser compartment.

Water is too hard.

If a phosphate-free detergent was used, try a detergent containing phosphates and compare

the results.
Dishes, cutlery, etc. are not dried properly
Selected programs do not have a drying function.

The contents were removed from the dishwasher too quickly.

Tea stains or traces of lipstick have not been completely removed
Detergent does not have an adequate bleaching effect.

Washing temperature was set too low.

Glasses become cloudy and discoloured and the coating cannot be wiped off
An unsuitable detergent has been used.

Glasses are not dishwasher safe.

17