Swiss Pro+ SP-DISHM Bedienungsanleitung Seite 15

Filter
The filters numbered 6 and 7 can prevent larger food particles in the water from reaching the pump.
These food particles can occasionally clog the filters.
When the appliance has finished washing, check the filters for food residues and clean them if

necessary.
After detaching the coarse microfilter No. 7, the filter unit No. 6 can be removed. Remove any

food residues and rinse the filters under running water.
Insert the filter unit No. 6 and tighten the coarse micro filter No. 7 in..

Spray arm
Limescale and food residue in the dishwasher water can clog the nozzles in the spray arms.
Inspect the nozzles in the clogged holes due to food residue.

If necessary, pull the lower spray arm up and lift it up.

Clean the spray arms under running water.

Reinstall the spray arms.

Troubleshooting
Solving small problems yourself
Experience shows that most problems that arise during normal daily use can be solved yourself
without the need to call in a service technician. This not only saves costs, but also ensures that the
device can be used again much earlier. The following list of common problems and their solutions
should help identify the causes of most problems.
Problems
When the appliance is turned on and the appliance does not start:
Fuse failure in the mains supply.

Plug not inserted in the wall socket.

Appliance door not closed properly.

Program button has not been pressed.

Water tap is not open.

Clogged strainer in water suction hose.

The strainer is located in the aquastop or supply hose connection.
15