Swiss Pro+ SP-DISHM Bedienungsanleitung Seite 14

Cancelling or modifying a cycle
To change a cycle that is already in progress, press the "Power" button. All settings will then be

cancelled. To set a new cycle, press the "Power" button to switch on the dishwasher. Then
press "Program" to choose a new washing mode. If the detergent has already been used during
the cycle change and the appliance may have already drained the washing water, the detergent
needs to be refilled.
To cancel a running cycle, press the "Power" button.

How to keep your dishwasher in shape
After every wash

After each wash, turn off the water supply to the appliance and leave the door ajar so that moisture
and odours are not trapped inside the appliance.
Remove the plug

Always remove the plug from the socket before cleaning or maintenance. Do not take any additional
risks.
No solvents or abrasive cleaning agents

- Do not use solvents or abrasive cleaners to clean the exterior and rubber parts of the dishwasher.
It is better to use only a cloth and warm soapy water.
- To remove soiling or stains from the interior surface, always use a cloth dampened with water and
a little vinegar or a detergent specially made for dishwashers.
Moving the appliance

If the appliance needs to be moved, try to keep it vertical. It can be placed on its back if absolutely
necessary.
Sealing

One of the factors that cause odours in the dishwasher is food that gets stuck in the seals. Periodic
cleaning with a damp sponge will prevent this.
The door should not be left in the open position since this could present a tripping hazard.
When going on a holiday

When you go on holiday, it is advisable to run a washing program with the dishwasher empty and
then to remove the plug from the socket, turn off the water tap and leave the door of the appliances
ajar. This makes the seals last longer and prevents odours from building up in the appliance.
Care and maintenance
Regular inspection and maintenance of the appliance will help prevent problems. This will save
extra time and aggravation. Therefore, carefully inspect the inside of the dishwasher from time to
time.
General condition of the appliance
Check that no grease or limescale has accumulated on the inside of the dishwasher.
If deposits are discovered: Clean the inside of the dishwasher thoroughly with a washing-up liquid.
14