Swiss Pro+ SP-DISHM Bedienungsanleitung Seite 16

CAUTION
Remember that repairs should only be carried out by a qualified specialist. Improper repairs
can cause significant damage to the equipment and endanger the user.
Error display on the time remaining indicator:
Problem
indicate
E1 Inlet abnormality
Temperature
E2
sensor alarm
E3 Overflow alarm
E4 Heating alarm
E5 Communication Communication problem.
Faucet
No water inlet
indicator light
OP The door is open
Water remains in the appliance at the end of the program
Blockage or item in the drain hose.

Pump is jammed.

Filters are blocked.

The program is still running. Wait for the program to end.
During washing:
Unusual amount of foam is creased
Normal dishwashing liquid has been poured into the dishwasher.

Remove any rinse aid spills with a cloth as this can lead to excessive foaming during the next

wash.
Appliance suddenly stops during a washing program
Disconnect the power supply to the appliance.

Water supply has been interrupted.

Knocking sound can be heard during washing
The spray arm knocks against the dishes in the appliance.

A rattling noise can be heard during washing.

Crockery is not stacked properly in the appliance.

Problem
1. Problem with intake valve or exhaust valve.
2. Problem with flow meter.
3. Problem with submersible pump.
The temperature sensor is not properly connected or
broken.
1. Inlet valve is broken causing too much water to
enter the dishwasher.
2. Spare parts have water leakage.
Problem with heating or temperature sensor.
Not enough water in the water tank.
The door is not closed properly or the connection
cable is broken.
Possible cause
16
Remark