Swiss Pro+ SP-DISHM Bedienungsanleitung Seite 13

Program data
The program data listed is based on standard operating conditions. The values can vary
considerably depending on different amounts of water mains temperature pressure and on the
mains water supply ambient temperature fluctuations in the mains voltage machine related factors
(e.g. temperature, water volume).
Turning on the dishwasher
Close the door.

Press the "Power" button.

Press the program button to select the washing mode. The screen shows the time remaining in

the program. If the program is changed, it can be continued by pressing the "program" button.
Press the "Start / Pause" button. The program will start automatically.

Power on/off Keep tableware
End of program
Six beeps will indicate that the wash cycle is complete and the dishwasher will shut down.
A few minutes after the program has finished:
Open the door.

Turn off the water tap.

Remove the contents when they have cooled down.

Interrupt the program
Open the door. Caution: There is a risk of water spraying out of the appliance. Do not open the

door fully until the spray arm has stopped rotating.
Open the door. Please press the "Start/Pause" button first!

If the appliance has already heated up, the hot water is switched on and the appliance door is

open: Leave the door ajar for a few minutes and then close it. Otherwise the door of the
appliance may open due to expansion.
Set appointed
dry
time to wash
Choose wash
mode
13
Pause or Start
Clean fruits