Other Risks; Technical Data - Meec Tools 18 V Bedienungsanleitung

by a qualified professional, and if
necessary repaired, before using it again.

OTHER RISKS

Even if you use this power tool in accordance
with all the safety instructions, there is still a
risk of personal injury and other damage. The
following hazards related to the design and
construction of this power tool can occur:
• Effects on health from vibration if the tool
is used for long periods, or is not handled
and maintained correctly.
• Personal injury and material damage as a
result of defective accessories and hitting
hidden objects when using the tool.
• Risk of personal injury and material
damage as a result of ejected objects.
• Damage to lungs (if an effective face mask
is not worn).
• Damage to ears (if effective ear protection
is not worn).
WARNING!
This power tool produces an electromagnetic
field during use. This field can in some
circumstances affect active or passive medical
implants. To reduce the risk of serious or
life-threatening injury, persons with medical
implants are therefore advised to consult
their doctor and the manufacturer of the
implant before using this power tool.
Symbols
The following symbols can be of importance
for how you should use your power tool. Make
sure you understand the symbols and their
significance.
Read the instructions.
Wear eye and ear protection.
Approved in accordance with
the relevant EU directives.
Recycle as electrical waste.

TECHNICAL DATA

Battery voltage
Speed, no load
Outer diameter of disc
Hole diameter
Spindle
Weight
Sound power level, L
wA
Sound pressure level, L
Vibration level, a
,
h AG
Surface grinding
Always wear ear protection.
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 60745-2-3.
18 V DC
8000 rpm
115 mm
22 mm
M14
1.82 kg
89.5 dB(A), K=3 dB
78.5 dB(A), K=3 dB
pA
7.54 m/s², K=1.5 m/s²
EN
37