Led Light Bar; Default Settings - Shure Mxa910 Bedienungsanleitung

③ Netzwerkgeschwindigkeits-LED (orange)
Aus = 10/100 Mbps
Ein = 1 Gbps

LED Light Bar

The LED on the microphone indicates whether the microphone is active or muted, identifies the hardware, and provides confir­
mation of firmware updates.

Default Settings

Microphone Status
Active
Mute
Hardware identification
Firmware update in progress
Reset
Error
Device power-up
Note: When the LED is disabled, the LED still illuminates while the device is powering up and when an error state occurs.
LED Behavior / Color
Green (solid)
Red (solid)
Green (flashing)
Green (progresses along bar)
Network reset: Red (progresses along bar)
Factory reset: Triggers device power-up
Red (split, alternate flashing). See the device event log for
details.
Multi-color flash, Blue (moves quickly back and forth across
bar)
Shure Incorporated
9/62