Lionelo Bastiaan ONE i-Size Bedienungsanleitung Seite 16

facing position. Try moving the seat - correctly anchored, it will not allow
the seat to change position.
FORWARD FACING (76 - 105 CM)
1. Press the seat rotation button (11, fig. B), then move the seat to the forward
facing position (see: Seat rotation). Try moving the seat - correctly anchored,
it will not allow to change position.
2. Place the seat on the vehicle's couch in the position designated for installation.
3. Push the ISOFIX sliding lever and extend the ISOFIX arms (fig. 1). Attach the
ISOFIX arms to the attachments located in the vehicle's couch. The arms will
interlock and you will hear a characteristic click.
4. The green indicator on the ISOFIX button must be visible on both sides (fig. 2).
5. If necessary, use the plastic guides provided to make installation easier (fig. 3).
6. Push the seat against the backrest of the vehicle's couch. Push the base
with left-right movements towards the backrest to make sure it is pressed
as tightly as possible against the vehicle's couch.
7. Adjust the seat tilt to one of the 4 available positions (see: Seat tilt adjustment).
NOTE! Any change in the recline of the backrest during use of the seat requires
readjustment of the Top Tether belt length.
8. Unbuckle the Top Tether belt, then press the length adjuster to adjust the
belt length and move the buckle and hook to the end of the belt (fig. 4).
9. Guide the Top Tether belt under the headrest of the car seat (fig. 6a).
10. Attach the Top Tether belt to an anchor point in the car. The anchor points
can be in different locations depending on the vehicle (fig. 7).
11. Tighten the Top Tether belt (fig. 8) and make sure the indicator is green (fig.
9). The seat is now correctly installed in the car.
Place the child in the seat and adjust the headrest (see: Headrest adjustment).
12.
13. Fasten the seat belts (see: Fastening and unfastening the child in the seat).
FORWARD FACING (100 - 150 CM)
1. Retract the seat belts (see: Retracting the 5-point seat belts).
2. Press the seat rotation button (11, fig. B), then move the seat to the forward
facing position (see: Seat rotation). Try moving the seat - correctly anchored,
EN ‑ 16 ‑