Siemens SINUMERIK 840D sl Handbuch Seite 88

8 Werkzeugverwaltung
8.3 Inbetriebnahme im NCK
$TC_MAP1[0]=0
$TC_DP1[0,0]=0
;type of search strategy
;–––––––––––––––––––––––
$TC_MAMP2=257
;definition of magazines
;–––––––––––––––––––––––
;real magazine
$TC_MAP1[1]=3
$TC_MAP3[1]=17
$TC_MAP6[1]=1
$TC_MAP7[1]=12
;buffer magazine
$TC_MAP1[9998]=7
$TC_MAP3[9998]=17
$TC_MAP6[9998]=1
$TC_MAP7[9998]=1
;load magazine
$TC_MAP1[9999]=9
$TC_MAP3[9999]=17
$TC_MAP6[9999]=1
$TC_MAP7[9999]=2
;locations of real magazine
;––––––––––––––––––––––––––
;location no 1
$TC_MPP1[1,1]=1
$TC_MPP2[1,1]=1
$TC_MPP3[1,1]=1
$TC_MPP4[1,1]=2
$TC_MPP5[1,1]=1
;location no 2
$TC_MPP1[1,2]=1
$TC_MPP2[1,2]=1
$TC_MPP3[1,2]=1
$TC_MPP4[1,2]=2
$TC_MPP5[1,2]=2
;
$TC_MPP1[1,3]=1
$TC_MPP2[1,3]=1
$TC_MPP3[1,3]=1
$TC_MPP4[1,3]=2
$TC_MPP5[1,3]=3
;
.
.
.
8-88
SINUMERIK 840D sl Inbetriebnahmehandbuch CNC Teil 4 (ShopTurn) – Ausgabe 08/2005
;search forward from 1st location for
;active tools
;magazine type (3: Revolver, 1: chain)
;magazine status (17: active magazine,
;enabled for loading)
;number of lines in the magazine
;number of magazine locations
;magazine type (7: buffer)
;number of buffer locations
;(1: spindle)
;magazine type (9: load magazine)
;number of loadpoints
;location kind (1: magazine location)
;location type
;consider adjacent location (1: on)
;location state (2: location free)
;location kind index (1: location no 1)
;location kind (1: magazine location)
;location kind index (2: location no 2)
© Siemens AG 2005 All Rights Reserved
08/2005