Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.6
After mowing
• Check all screws and nuts before the next use. Tight-
en up loose screws.
• Empty the grass collection basket before the next use.
• Please also observe the chapter "Storage".
10 Cleaning and maintenance
WARNING
Have maintenance and repair tasks that are
not described in this operating manual, car-
ried out by a specialist workshop. Use only
original spare parts.
There is a risk of accident! Always perform
maintenance and cleaning work with the bat-
tery removed. There is a danger of injury! Let
the Product cool down before all mainte-
nance and cleaning tasks. Elements of the
engine are hot. There is a danger of injury
and burning!
The product can start unexpectedly and cause injuries.
–
Remove the battery.
–
Allow the product to cool down.
–
Remove the tool attachment.
10.1
Cleaning
• Keep protective devices, air vents and the motor
housing as free of dust and dirt as possible. Rub the
product clean with a clean cloth or blow it off with
compressed air at low pressure. We recommend that
you clean the product directly after every use.
• Ventilation openings must always be free.
• Cleaning with a garden hose is only recommended at
low pressure. A high-pressure cleaner is not suitable
for cleaning the lawnmower.
1. Unhook the grass collection basket and brush it out
with a hand brush. You can also roughly clean the
housing of the lawnmower with the sweeper.
2. Clean the underside of the lawnmower with a spatula
and hand brush. The spatula helps to remove coarse
and larger plant debris from the area of the blade (19).
Cleaning the underbody is easier and more thorough
immediately after use. Then dirt and plant residues
are still fresh and can be loosened more easily.
3. Do not use any cleaning products or solvents; they
could attack the plastic parts of the product. Make
sure that no water can penetrate the product interior.
4. Check that the grass ejection is clear of grass resi-
dues and remove these if necessary.
28 | GB
10.2
Maintenance
WARNING
Danger of injury!
Remove the battery from the power tool before carrying
out any work on the power tool (e.g. maintenance, tool
change, etc.) and when transporting and storing it.
There is a risk of injury if the on/off switch is operated
unintentionally.
10.2.1
WARNING
There is a risk of injury if you work with a
damaged blade.
–
Wear protective gloves!
–
For safety reasons you should only ever have your
blade sharpened and balanced by an authorised
specialist workshop. For optimum results it is rec-
ommended that the blade should be inspected once
a year.
–
When changing the blade, only use original spare
parts.
1. Hold the blade (16) tightly with one hand.
2. Turn the blade screw (15) anticlockwise using a
13 mm open-ended spanner (not included in the
scope of delivery).
3. Remove the blade screw (15) and the washer.
4. Re-install the new blade (16) in reverse order. Fasten
the blade screw (15) properly. Ensure that the blade
(16) is correctly positioned in the fastening pins and
lies flush.
5. The tightening torque of the blade screw (15) is
45Nm. Also replace the blade screw (15) when replac-
ing the blade (16).
10.2.2
If the blade (16) has come into contact with an obstacle:
• Switch off the motor, wait for it to stop, remove the
battery and pull out the safety key.
• Check the blade (16) for damage.
• Damaged or bent blades (16) must be replaced.
• Never attempt to bend a bent blade (16) back to
straight again.
• Never mow the lawn with a bent or heavily worn blade
(16) as this will cause vibrations and can lead to fur-
ther damage to the lawnmower.
11 Storage and transport
Store the product and its accessories in a dark, dry and
frost-free place that is inaccessible to children.
The optimum storage temperature is between 5°C and
30˚C.
Store the product in its original packaging.
Cover the product to protect it from dust or moisture.
Store the operating manual with the product.
www.scheppach.com
Changing the blade (16) (Fig. 19)
Damaged blade (16) (Fig. 19)
Werbung
