Husqvarna Aspire S20-P4A Bedienungsanweisung Seite 14

• For Aspire S20-P4A: Hold the product with your right
or left hand. Keep hands and other body parts away
from the blade.
(Fig. 25)
• For Aspire S20-P4A + Aspire Pole-P4A: Always hold
the product with both hands.
(Fig. 26)
• Before you remove unwanted materials from the
product, stop the motor and make sure that the
blade does not turn.
• Stop the product before you move to another
area. Attach the transport guard before carrying or
transporting the product any distance.
• Never put the product down when it is activated
unless you have it in clear sight.
• Observe the applicable safety regulations for work in
the vicinity of overhead power lines.
• This product is not electrically insulated. If the
product touches or comes close to high-voltage
power lines it could lead to death or serious bodily
injury. Electricity can jump from one point to another
by arcing. The higher the voltage, the greater the
distance electricity can jump. Electricity can also
travel through branches and other objects, especially
if they are wet. Always keep a distance of at least 10
m between the product and high voltage power lines
and/or objects that are touching them. If you have
to work within this safe distance you should always
contact the relevant power company to make sure
the power is switched off before you start work.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
• Always use approved personal protective equipment
when you use the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the right
equipment.
• Use a helmet if it is possible that objects can fall on
you.
(Fig. 27)
• Use approved hearing protection.
(Fig. 28)
• Use approved eye protection. If you use a visor,
you must also use approved protective goggles.
Approved protective goggles must agree with the
ANSI Z87.1 standard in the USA or EN 166 in EU
countries.
(Fig. 29)
• Use gloves when it is necessary, for example when
you attach, examine or clean the cutting equipment.
(Fig. 30)
14
Read the warning
• Use protective boots, or shoes, with non-slip soles.
(Fig. 31)
• Use pants with saw protection.
• Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, open shoes or go
with bare feet. Put your hair up safely above your
shoulders.
• Keep first aid equipment close at hand.
(Fig. 32)
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
In this section the product's safety features, its purpose
and how checks and maintenance should be carried
out to ensure that it operates correctly. See instructions
Product overview on page 9 to find
under the heading
where these parts are located on your product.
The life span of the product can be reduced and the risk
of accidents can increase if product maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING:
damaged safety components. The product's
safety equipment must be inspected and
maintained as described in this section.
If your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION:
All servicing and repair work
on the machine requires special training.
This is especially true of the machine's
safety equipment. If your machine fails
any of the checks described below you
must contact your service agent. When
you buy any of our products we guarantee
the availability of professional repairs and
service. If the retailer who sells your
machine is not a servicing dealer, ask him
for the address of your nearest service
agent.
To do a check of the user interface Aspire S20-P4A
The green LEDs (A) show the state of charge. The
green LEDs also show that the product is on.
1. Push and hold the on/off button (B). (Fig. 33)
a) The product is on when the green LEDs (A) are
on.
Read the warning
Never use a product with
2200 - 004 - 03.11.2023