Herunterladen Diese Seite drucken

Husqvarna Aspire S20-P4A Bedienungsanweisung Seite 21

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 88
Troubleshooting of the battery charger
LED on the battery
Cause
charger
The green LED is on. The battery is not correctly instal-
led in the battery charger.
The battery connectors and the
battery charger connectors are
dirty.
The charger has identified an in-
ternal error.
The battery is damaged.
The battery temperature is out-
side of the charging range.
The green LED is off. The plug socket, mains cable or
battery charger is damaged.
The battery charger is not cor-
rectly connected to the mains
outlet.
Other errors.
If other errors occur, make sure that the product is off, remove the battery and speak to an
approved service agent.
Transportation, storage and disposal
Transportation and storage
The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
Use tape on open contacts when you put the battery
in a package. Put the battery in the package tightly
to prevent movement.
Remove the battery for storage or transportation.
Put the battery and the battery charger in a space
that is dry and free from moisture and frost.
Do not keep the battery in an area where static
electricity can occur. Do not keep the battery in a
metal box.
Put the battery in storage where the temperature
is between -20°C/-4°F and +50°C/122°F and away
from open sunlight.
2200 - 004 - 03.11.2023
Solution
Remove the battery from the charger and install the bat-
tery in the battery charger again.
Clean the battery connectors and the battery chargers
connectors. For example insert and remove the battery
from the battery charger several times.
Ensure that all batteries are fully inserted. Remove the
mains plug and reinsert. If the error occurs again, have
the charger checked by an authorised after-sales service
centre for Husqvarna products.
Replace the battery.
Wait until the battery temperature is back within the per-
mitted charging temperature range (0-35°C).
Do a check of the mains voltage. If necessary, speak to
an approved service agent.
Connect the battery charger to a mains outlet.
Put the battery charger in storage where the
temperature is between 5 °C/41 °F and 45°C/113°F
and away from open sunlight.
Use the battery charger only when the surrounding
temperature is between 0°C/32°F and 35°C/95°F.
Put the product in storage where the temperatures
between -40°C/-40°F to +60C°/140°F.
Charge the battery 30% to 50% before you put it in
storage for long periods.
Put the battery charger in storage in a space that is
closed and dry.
Keep the battery away from the battery charger
during storage. Do not let children and other not
approved persons to touch the equipment. Keep the
equipment in a space that you can lock.
Clean the product and do a full servicing before you
put the product in storage for a long time.
Use the transportation guard on the product to
prevent injuries or damage on the product during
transportation and storage.
Attach the product safely during transportation.
21

Werbung

loading

Diese Anleitung auch für:

Aspire s20-p4a+aspire pole-p4a