hanseatic 65C90C7-E11B200 Gebrauchsanleitung Seite 65

Signal tones
(21)
(22) (20)
If you use one of the controls (16) or (22), or
if you tap on one of the sensors (17) to (21),
you will hear a signal tone.
Start the cooking process
The following description applies to all func-
tions/heating modes except for
See below.
(22) (19)
1. Selecting a function:
Turn the dial (22) until the display (19)
shows the corresponding symbol and its
standard temperature.
2. To confirm the function selection and start
cooking, tap the sensor (17).
The display shows the maximum cooking
time of hours, the standard tempera-
9: 0 0
ture flashes to indicate that the oven is still
heating up. For functions with circulating
air or hot air, you will also see a rotating
fan symbol. The oven lighting is on. You will
hear a soft sound coming from the external
cooling fan.
(17)
(18) (16)
and .
(17)
88:88
c
888
The oven
(22) (19)
3. Changing the cooking time:
Turn the dial (22) until the display (19)
shows the desired cooking time (
).
9: 0 0
4. To confirm the displayed cooking time, tap
the sensor (17).
The display shows the maximum cooking
time of hours and the standard tem-
9: 0 0
perature flashes.
(19)
88:88
c
888
5. Adjusting the temperature:
Turn the dial (16) until the display (19)
shows the desired temperature.
6. To confirm the displayed temperature, tap
the sensor (17).
Once the preset cooking duration has
elapsed, you will hear five signal tones
and the oven will switch off automatically.
Interrupting/ending the
cooking process
• To interrupt the cooking process, tap the
sensor (18) once.
The remaining cooking time and the cur-
rent temperature will flash in the display.
To continue cooking, tap the
sor (17).
– To end the cooking process, tap the
sensor (18) twice.
Page EN-21
(17)
88:88
c
888
to
0: 0 1
(17) (16)
sen-