Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Load memory
Recall the stored programs from the user
Memory.
To recall the Welding Program from the User Memory:
Note: Before using, the Welding Program had to be
assigned to the user memory
Add the Load memory icon to the Welding
Parameters Bar.
Use the Right Knob [36] to highlight the Load
memory icon.
Press the Right Knob [36] to confirm – the Load
Memory Menu is shown on the display.
Use the Right Knob [36] to highlight the Memory
number which from the Welding Program will be
recall.
Confirm the select – press the Right Button [36].
USB
When the USB storage device is connected
to USB port – user have access to:
Table 10. USB Menu
Symbol
Description
Save
Load
Save - the following data can be save on a
USB Memory Stick:
Table 11. Save and restore selection
Symbol
Current Welding Settings
Advanced Parameters Configuration
(P menu)
All welding programs stored in user
memory
One of the welding programs stored in
M1
user memory
M50
English
Description
To save data into USB device:
Connect the USB to welding machine.
Add USB icon to the Welding parameters bar [44].
Use the Right Knob [36] to highlight the icon "USB".
Press the Right Knob [36] to confirm the selection –
the USB menu is shown on the display.
Use the Right Knob [36] to highlight the icon "Save".
Press the Right Knob [36] to get access of Save
option – the save menu is shown on the display.
21
Figure 23.
Figure 24.
Figure 25.
English
Werbung
