QUAMAR Q50 Bedienungsanleitung Seite 46

DISPLAY PROGRAMMING
Press the key "+" or "-" to slide the menu options, select "total count" pressing key "OK".
When you change the grinding blades press key "RESET" to carry back the number as
the value of "WEAR GRINDERS". After doing it, the written "WEAR GRINDERS" will
disappear from the display. To exit from programme menu press "ESC".
PARTIAL COUNT OF EROGATED DOSES - Provides information on the quantity of
erogated doses from the last reset (usually to count the erogated doses during the day/
week). To reset press for 3 seconds key "MENU" to get ac-cess to programme menu. Press
the key "+" or "-" to slide the menu options, select "partial count" pressing key "OK". Keep
touched key "RESET" untill the value returns to zero. To confirm and exit press "OK". To
exit from programme menu press "ESC".
MONTHLY COUNT OF EROGATED DOSES - Provides information on the quantity of
erogated doses from the last reset (usually to count the erogated doses during the month)
and on the quantity of erogated doses in the previous 30 days. To reset press for 3 seconds
key "MENU" to get access to programme menu. Press the key "+" or "-" to slide the menu
options, select "monthly count" pressing key "OK". Keep touched key "RESET" untill the
value returns to zero. To confirm and exit press "OK". To exit from programme menu press
"ESC".
CHANGE LANGUAGE - Keep touched for 3 seconds key "MENU" to get access to
programme menu, press key "+" or "-" to slide the menu options, select "CHANGE
LANGUAGE": select pressing key "OK", then using "+" or "-" it's possible set the choosen
language among the available ones. After choosing the language, press again key "OK" to
confirm and exit. To exit from programme menu press "ESC".
PASSWORD SET-UP - Set the password for the MENU to be used. The password is
numeric and consists of five definable digits from 0 to 9. Press "MENU" for 3 seconds
to access the programming menu; press the "+" or "-" button to scroll the menu until
"PASSWORD SET-UP" is reached: select it by pressing "OK". Set the password as follows:
use the "+" and "-" keys to scroll the desired number. Press "MAN" to move to the next
digit. Once the password has been defined, press "OK" to confirm and exit. Press "ESC" to
exit the menu.
OPTION PASSWORD - Enables or disables the password to access the "MENU".
ATTENTION - The default password is 123456
46