QUAMAR Q50 Bedienungsanleitung Seite 36

OPERATION
BRIGHTNESS - Used to set the brightness of the display.
Press the 'MENU' button for 3 seconds to access the programming menu, press the '+'
or '-' button to scroll through the menu until you reach 'brightness'. Select it by pres-
sing the 'OK' button, then use '+' or '-' to increase or decrease the brightness from 0
to 100 %. To confirm and exit, press 'OK'. To exit the programming menu, press 'ESC'.
TOTAL DISPENSED DOSES COUNT - Provides information on the total doses dis-
pensed by the grinder-dispenser. Press the 'MENU' button for 3 seconds to access the
programming menu.
Press the '+' or '-' button to scroll through the menu, select 'total count' by tapping
the 'OK' button.
PARTIAL COUNT OF DISPENSED DOSES - Provides the amount of doses dispen-
sed since the last reset (usually to account for doses dispensed throughout the day/
week). To reset, press the 'MENU' button for 3 seconds to access the programming
menu, press '+' or '-' to scroll through the menu until you reach the message: 'partial
count'.
Then press and hold the 'MAN' button until the displayed digit returns to zero. To exit
the menu, press 'ESC'.
CHANGE LANGUAGE - Press the 'MENU' button for 3 seconds to access the pro-
gramming menu, press the '+' or '-' button to scroll through the menu until you reach
'change language': select it by tapping the 'OK' button, then use '+' or '-' to scroll
through the available languages. Once the desired one has been found, press the 'OK'
button again to confirm and exit. To exit the menu, press 'ESC'.
SETUP PASSWORD - Sets the password for using the MENU. The password is nu-
meric, consisting of five digits definable from 0 to 9. Press the 'MENU' button for 3
seconds to access the programming menu, press the '+' or '-' button to scroll through
the menu until you reach the message 'SETUP PASSWORD': select it by tapping the
'OK' button.
To set the password: use the '+' and '-' keys to scroll to the desired number. Press the
'MENU' button to move to the next digit. Once the password has been defined, press
the 'OK' button to confirm and exit. To exit the menu, press 'ESC'.
OPTION PASSWORD - Enables or disables the use of the password to access the
'MENU'.
IMPORTANT NOTE: CAUTION - The default password is 12345.
Stand-by consumption: 1.1 W.
36