QUAMAR Q50 Bedienungsanleitung Seite 33

OPERATION
MACHINE WEAR - Provides information on the total amount of doses that can be
dispensed before replacing the millstones. This item is editable.
Press the 'MENU' button for 3 seconds to access the programming menu. Press the '+'
or '-' button or to scroll through the menu, select 'grind wear' by pressing the 'OK' but-
ton. To increase or decrease doses, press '+' or '-'. To confirm and exit, press 'OK'. To
exit the programming menu, press 'ESC'.
When the maximum dispensable doses are reached, with the grinder set in use, 'WORN
GRINDER' will appear on the display.
When replacing the grinders, enter the general programming menu and access 'TOTAL
DISPENSED DOSES COUNT'. Press the 'RESET' button for about 5 seconds to reset
the 'Missing' entry to the 'Grinder Wear' value. In this way, the words 'Worn Grinder'
disappear from the display. To exit the menu, press 'ESC'.
SETTING THE TEXT IN 'READY' MODE - Press the 'MENU' button for 3 seconds to
access the programming menu, press "+" or "-" to scroll through the menu until you reach
the "bar text". Select it by pressing 'OK', then use the 'MAN' key to move the cursor to
the point where you want to start the text. Now use the '+' and '-' keys to scroll through
the alphanumeric list, stopping at the desired character; to move to the next character to
be entered, always press the 'MAN' key. Repeat the procedure until the desired text has
been entered. To confirm and exit, press 'OK'. To exit the menu, press 'ESC'.
BRIGHTNESS - Used to set the brightness of the display. Press the 'MENU' button for
3 seconds to access the programming menu, press the '+' or '-' button to scroll through
the menu until you reach 'brightness'. Select it by pressing the 'OK' button, then use '+'
or '-' to increase or decrease the brightness from 0 to 100 %. To confirm and exit, press
'OK'. To exit the programming menu, press 'ESC'.
SET TIME/DATE - Press the 'MENU' button for 3 seconds to access the programming
menu, press '+' or '-' to scroll through the programming menu until you reach 'Time/
Date': select it by pressing 'OK'. The flashing time will first appear ready to be set. Pres-
sing '+' or '-' increases or decreases the highlighted digit. To confirm the hours, minutes,
seconds and date, press the 'OK' button repeatedly. To confirm and exit, press 'OK'. To
exit the menu, press 'ESC'.
TOTAL DISPENSED DOSES COUNT - Provides information on both the total doses
dispensed by the grinder-dispenser and the remaining doses before the next grinder
change. Press the 'MENU' button for 3 seconds to access the programming menu.
Press the '+' or '-' button to scroll through the menu, select 'total count' by pressing the
'OK' button.
N.B.: when replacing the grinders, press the 'RESET' button for about 5 seconds to reset
the 'Missing' entry to 'Grinder Wear'. In this way, the words
'Worn Grinder' disappear from the display. To exit the menu, press 'ESC'.
33