QUAMAR Q50 Bedienungsanleitung Seite 39

1. 10
1.1
1.7
1. 3
1. 2
MANUAL MODE: Clicking button 1.1 starts grinding in manual mode for a maximum
cycle time of 20 min. To stop grinding, click button 1.1 or the Reset button ( 1.7 ) again.
SINGLE DOSE MODE: Clicking button 1. 2 starts single dose grinding for a set time
cycle ( 1. 3 ). By clicking on the 1. 2 button during grinding the process can be suspended
and then restarted until the set dose time is completed.
DOUBLE DOSE MODE: clicking the button 1. 4 starts the double dose grinding for
a set time cycle ( 1. 5 ). By clicking on button 1. 4 during grinding the process can be
suspended and then restarted until the set dose time is completed.
SETTINGS/DOSES
2.6
DOSE1 DOSE2
2. 1
Sec. Sec.
2. 4
You can set the grinding times for the doses by clicking inside the reference cell (2.1, 2.2
and 2.3) and using the adjustment buttons (2.5). To confirm the desired time, click on
the confirm button (2.5).
1. 9
1. 8
1. 6
1. 5
1. 4
2.7
2. 2
DOSE3
2.3
Sec.
2.5
SOFTWARE INTERFACE
1 HOME PAGE
Manual dose start/stop
1.1
Start/Stop single dose
1.2
Single dose grinding time
1.3
1.4
Start/Stop double dose
1.5
Grinding time double dose
1.6
Menu: access (par.3)
1.7
Reset
1.8
Settings/Doses: access (par.2)
1.9
Password active/inactive
1. 1 0 On/off switch button
2 SETTINGS/DOSES
Set grinding time single dose
2.1
Set grinding time double dose
2.2
Set grinding time manual dose
2.3
Adjustment buttons
2.4
2.5
Confirmation button
2.6
Home: return (par.1)
2.7 Menu: access (par.3)
39