QUAMAR Q50 Bedienungsanleitung Seite 40

Two operating modes can be set for manual dosing.
If the time is set to '0' the button operates in continuous grinding mode for
time cycles of twenty minutes each time the button is pressed.
Conversely, if the time is set to a value other than "0" the button functions as
"dose time 3"
3. 5
MENU
3. 1
DOSES
3.3
TECHNICAL
4. 4
TECHNICAL
4. 1
Grinder
Grinder
Wear
4.2
Password
Button 4.1 allows access to the "Grinding wheel wear" page (par. 5).
To confirm the setting of buttons 4.2, 4.3 and 4.5 click on the confirmation button (4.7).
Button 4.4 allows access to the "Change password" page (par. 6).
40
3.2
COUNTERS
3.4
DISPLAY
4.7
4. 5
xx.xx
4. 3
4. 6
ON OFF
SOFTWARE INTERFACE
3 MENÙ
3. 1 Settings/Doses: access (par.2)
3. 2 Counters: access (par.9)
3. 3
Technical: access (par.4)
3. 4
Display: access (par.10)
3. 5
Home: return (par.1)
4 TECHNICIAN
4. 1 Millstone wear: access (par.5)
Set password
4. 2
4. 3 Confirmation button
4. 4
Home: return (par.1)
4. 5
Menu: access (par.3)
Password activation/deactivation
4. 6
Version Firmware
4.7