Werbung
Verfügbare Sprachen
Verfügbare Sprachen
You can change the values for date, time, stand-by time, screen brightness and menu
language by clicking in the reference cells, using the adjustment buttons (10.8) and
confirming with the confirmation button (10.9).
The stand-by time (10.3) indicates the time required to activate the screensaver and is set
in seconds.
Click on button 10.6 to customise the screensaver (par. 11), after inserting a USB key,
containing the desired image(s), into the appropriate port.
1 1
.
5
SCREENSAVER
Select Screensaver from USB
1 1
.
1
File Selection
Load Screensaver
1 1
.
2
Load Image
Test Screensaver
Test Image
Click on button 11.1 to select the desired image from those contained within the USB stick
and confirm by clicking the green tick in the top right-hand corner. Click on button 11.2 to
load the image (when finished, the message "Programming complete" will appear). Using
button 11.3 you can see a preview of the selected image, to exit click on the screen.
The image chosen as screensaver must have a ".bmp" extension and a
resolution of 320x240 pixels.
SOFTWARE INTERFACE
11 SCREENSAVER
"File Selection" button
1 1
.
1
"Upload Image" button
.
1 1
2
1 1
.
4
"Image Test" button
1 1
.
3
1 1
.
4
Display: return (par.10)
1 1
.
3
1 1
.
5
Home: return (par.1)
43
Werbung
