Atlas Copco TEX 09PE Sicherheits- Und Betriebsanleitung Seite 20

Safety and operating instructions
If there is a risk of freezing, check that the
♦
machine's exhaust ports are not blocked.
If the machine function is still not satisfactory after
♦
this procedure, contact an authorised service
workshop.
Storage
Clean the machine properly before storage, in
●
order to avoid hazardous substances. See "Dust
and fume hazard"
1
● Pour approximately ⁄
2
the air inlet nipple, connect the machine to the
compressed air supply and start it for a few
seconds.
● Always store the machine in a dry place.
Disposal
A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in respect to local restrictions.
20
oz (5 cl) of oil directly into
© 2014 Construction Tools PC AB | No. 9800 0812 90f | 2014-08-12
TEX 05PE, 09PE, 12PE
Original instructions