Veratron VL FLEX 52MM Serie Bedienungsanleitung Seite 14

CONFIGURATION
VL FLEX CONFIGURATOR APP
To configure the VL Flex, some parameters must be configured, e.g., the display type, the connected sensor
and its calibration or the alarm threshold.
This is possible via the smartphone app "VL Flex Configurator", which can be downloaded free of charge
from the stores of both - Android and iOS devices.
You can also find a simple explanation of the setup process as in-app instructions.
Thanks to the passive NFC receiver, the VL Flex device can be configured as described below without the
need for a power supply.
CONFIGURE DEVICE
Setting up the VL Flex device is a three-step process.
Remember that the configuration of the instrument must be read before it can be changed and written to
the instrument.
1. READ
12
VL FLEX
CONFIGURATOR
2. CONFIGURE
CONFIGURATION
3. WRITE
B000882