CHAUFFAGE FRANCAIS Stelios 250 L Benutzerhandbuch Seite 60

■ *
■ Reading and Configuration of parameters:
1. Reading the parameters.
From the homepage, press the button for 3 seconds to access the settings page.
The temperature area displays the code of the parameter, the clock area displays the value.
Press or to scroll through the parameters.
Press or without action for 30 seconds, return to the home screen.
Lists of parameters:
Parameter no.
F0
F1
F2
F3
F4
F5
F6
F7
2. Configuration parameters:
From the homepage, press the keys
configuration page.
Temperature area display parameter code, clock area display value.
Press the or
Press the button to confirm or change the parameter.
By pressing the
returns to the homepage.
Description
Discharge temperature
Ambient temperature
Evaporator coil temperature
Suction temperature
Open pulse of the EEV
Controller version no.
PCB version no.
Solar collector temperature
and
buttons to adjust the parameter.
or button or leaving without any operation within 30 seconds, the system
T° range
0~130℃ Display "--" in case of fault
Display "--" in case of fault
-30~100℃
Display "--" in case of fault
-30~100℃
Display "--" in case of fault
-30~100℃
0~150℃ Display "--" in case of fault
simultaneously for 3 seconds to enter the
Note