CHAUFFAGE FRANCAIS Stelios 250 L Benutzerhandbuch Seite 50

(2) Power specifications
Power Neutral wire/Phase
220-240VAC~
50Hz
8.
Commissioning
(1) Before commissioning
The appliance must be installed and connected correctly

Piping and wiring must be correct

The supply voltage must correspond to the nominal voltage.

The wastewater evacuation must work properly.

The insulation must be completed.

The earth wire must be correctly connected.

The air inlet and outlet orifices should not be obstructed.

The water heater must be filled with water.

(2) Live operation
Make sure that all control buttons are functional.

Check if the hot water system is working correctly and if the outlet water temperature is normal.

When the safety valve is operating, check that it can evacuate water.

Check that there are no abnormal vibrations or noises during the operation of the device

Power cord diameter
(mm2)
wire
(Length ≤ 30m)
≥1.5
Hand switch
(A)
Earthing
Capacity
wire
≥1.5 20
Earth leak circuit
breaker
Fuse
30mA
15
30mA, below 0.1 sec
.