CHAUFFAGE FRANCAIS Stelios 250 L Benutzerhandbuch Seite 49

7.
Electrical wiring
The appliance must use the specified power cord, which must comply with the table below. The supply

voltage must also correspond to the required nominal voltage.
The power circuit must be equipped with an earth wire, which must be connected to the external earth

effectively.
The connection of the cables must be carried out by a professional technician in strict compliance with

the electrical diagram.
Put in place an earth leakage protection in accordance with the standards in force applicable to electrical

equipment.
Use an omnipolar disconnection device with a contact separation of at least 3 mm when connecting the

power supply.
Check the electrical circuit twice before connecting it to the electrical supply.

Do not disconnect or cut the earth wire, and do not use broken cables or switches in any way. If you

notice a break, the power cord must be replaced as soon as possible.
(1) Earth leak circuit breaker protection
Fig.7 Earth leakage protection