CHAUFFAGE FRANCAIS Stelios 250 L Benutzerhandbuch Seite 40

■
Electrical supply requirements

Wiring must be carried out by a qualified technician, and all work must comply with safety requirements.

In accordance with national requirements for electrical appliances, the appliance must be equipped with

an earth leakage protection device.
The installation must comply with the rules in force in terms of wiring.

When connecting to the electrical supply, a bipolar protection device must be installed.

If the power cable must be replaced, care must be taken to respect the Phase and Neutral direction.

Note: It is forbidden to disconnect or disassemble the earth wire from the electrical supply, under any

circumstances. It is forbidden to use damaged wires and switches and these must be replaced
immediately as soon as they are.
Safety instructions

The device is designed to provide hot water to users, only within the scope of the described use.

Do not use or store gasoline or other flammable or explosive gases or liquids near the device, otherwise

damage will be caused.
For your safety and that of others, do not place anything near the outlet or air inlet ports of the device.

Children are not allowed to play with the appliance in order to avoid any danger.

Please turn off the device during repairs and maintenance in order to avoid any accidents.

Make sure that the refrigerant of the refrigeration system has been completely drained before brazing,

because the refrigerant produces harmful gases in case of fire and can easily cause a fire.
Install the electrical connections at the water inlet and outlet.

Change of installation site

If you need to change the installation location, please contact your dealer or our customer service.