CHAUFFAGE FRANCAIS Stelios 250 L Benutzerhandbuch Seite 42

A
B
C
D
Note:
All images in this manual are provided for explanatory purposes only. They may be slightly different
from the device you bought (depending on the model) and it is the actual appearance that prevails.
■
 Tools and equipment necessary for the basic installation
Name
Pipe wrench
Straight screwdriver,
Phillips screwdriver
Wire Stripping Pliers –
Cutting Pliers
Security Group
Water pipe, flexible, seals
Hot water pipe insulation
material
■
Instructions for installation

1 Transport of the device
This device is quite heavy and must be moved and installed by two or more people, otherwise injury or

other accidents will be caused.
Please transport the device in the condition it is in upon delivery, do not disassemble it yourself.

In order to avoid scratches and deformations of the surface, please add a protective panel on the surface

of the device that could come into direct contact with hard objects.
Be careful not to touch the fins and the fan with your hand or other objects.

Do not transport the appliance when the inclination is greater than 45°. Do not lay the appliance on the

ground.
Stelios 250L
Stelios 250L
Stelios 250L
Stelios 250L
QTY
2 pcs
1 pc per piece
1pc
1 pc
According to needs
According to the desired length
1220 mm
1760 mm
1040 mm
255 mm
Usage
To connect the water pipes
To disassemble the electrical control
box and connect the wires.
To strip and cut the cables
To connect the water supply pipes of
the tank
PPR pipe, PAP pipe.
To isolate