Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
Connecting the ducts
The device is designed to be connected to a duct that can provide an additional practical function
as described below. In the case of an appliance connected to a duct, the diameter of the duct must be ≥
170 mm. The total length, generally using a flexible plastic duct, must not exceed the maximum length of
6m.
Connecting a duct leads to a loss of air flow, which leads to a reduction in the capacity of the system.
● Example 1.
The appliance installed in the garage/the house can refresh the air. The inlet air comes from an internal
duct, the outlet air is routed towards the outside. Total length ≤ 6 m.
Fig.5.1
Werbung
