Ferm FAG-125/1050 Gebrauchsanweisung Seite 4

GB
ANGLE GRINDER
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
drawing on page 2-3
For your own safety and that of others,
we recommend that you read this
instruction manual carefully before
using this machine. Keep this instruction
manual and the documentation
provided with the machine for future
reference.
Introduction
This machine is developed for grinding and
roughing of metal and stone. With help of the
correct accessories the machine can also be used
for brushing and sanding.
Contents
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
Contents of packing
1 Angle grinder
1 Side handle
1 Spanner
1 Set carbon brushes
1 Instruction manual
1 Safety instructions
1 Warranty card
Check the machine, loose parts and accessories
for transport damage.
4
Technical specification
Voltage
Frequency
Power input
No-load speed
Disc diameter
Spindle dimension
Weight
Lpa (sound pressure)
Lwa (sound power)
Vibration value
Features
Fig. 1
1. On/off switch
2. Guard
3. Side handle
4. Grinding disc
5. Spindle lock
6. Switch lock
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
Use spindle lock only in stand still
mode.
Risk of fire.
Keep bystanders away.
Wear ear and eye protection.
Wear protective gloves.
230 V
50 Hz
1050 W
11000/min
125 mm
M14
2.45 kg
88+3 dB (A)
99+3 dB (A)
9.8+1.5 m/s
2
Ferm