Specification; Dimensions And Connections - AEG MTE 350 Bedienungs Und Installationsanleitung Handbuch

Installation - for contractors
Cleaning the strainer
You can clean the fitted strainer after removing the cold
water supply pipe.
Checking the earth conductor
» Check the earth conductor (in Germany e.g. BGV
A3) on the earth conductor contact of the power
cable and on the appliance connector.
Appliance storage
» Store the dismantled appliance in a room free from
the risk of frost, as water residues remaining inside
the appliance can freeze and cause damage.
Replacing the power cable for the MTE 570
» If replacing the cable for the MTE 570, use a power
cable with 4 mm² cross-section.
42

15. Specification

15.1 Dimensions and connections

c01 c06
30
120
190
b02 Entry electrical cables I
b03 Entry electrical cables II
c01 Cold water inlet
c06 DHW outlet
20
b02
b03 82
Male thread G 3/8 A
Male thread G 3/8 A