WimTec Rohbauset W7 Montageanleitung Seite 8

EN
Flush-mount set W7
Observe during assembly
1/2 1/2
47 mm
Center Outlet
47 mm from left of the center
of the flush-mount set.
min. 80 mm
max. 100 mm
Installation depth:
Min. 80 mm to max. 100 mm
on the front edge of the
finished wall structure
(if necessary, compensate
with an underlay).
8
12 - 16 cm
Distance to washbasin
The distance from the lower
edge of the flush mount set to
the top edge of the washbasin
is 12 - 16 cm.
Horizontal / vertical alignment
Align the flush-mount set both
horizontally and vertically!
13 mm
Size front plate
The front plate protrudes
13 mm over the flush-mount
set on all sides.
max. 6 mm
Distance to tiles
The tiles may be no more than
max. 6 mm away from the
flush-mount set!
13 mm