Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.3 Qualification of personnel
Installation, commissioning, operation, maintenance, decommissioning and disposal may
be carried out only by appropriately qualified specialist personnel.
Work on electrical components must be performed only by a qualified electrician and in
accordance with the applicable regulations and guidelines.
1.4 Limitation of liability
The manufacture shall accept no liability in the event of failure to follow the instructions or
comply with technical regulations, improper use of the device or use in a manner other
than that intended, or alteration or damage to the device.
1.5 Intended use
The DPT 200 Differential Pressure Transmitter was designed specifically for the proc-
ess industry and is used for applications that include level measurement in closed, pres-
surised tanks and monitoring of pumps and filters.
The pressure transmitter DGP 200 and DGP 100 was designed specifically for the de-
mands of the process industry and capture under, over and absolute pressure of gases,
steams, liquids up to 400 bar or 600 bar.
The device is equipped as standard with HART
be set using a PC, HART
This user manual is intended for devices with Ex certification and use in Ex areas. A de-
vice possesses Ex certification if this is specified in the order and has been confirmed in
our order confirmation. In addition, the type plate includes an
The "1/2G" designation permits installation of the device in the partition between Zone 0
and Zone 1. The diaphragm is the zone separator. Use of the entire device in Zone 0 is not
possible.
Media that can be measured are gases or liquids that are compatible with the materials
that contact the medium. These are described in the data sheet. Furthermore, it must be
ensured in each individual case that the medium is compatible with the parts they come
into contact with it.
The technical data as set out in the current data sheet are authoritative. Should you not
have the data sheet, please request it from us or download it from our website.
(http://www.bdsensors.de)
Danger of death through incorrect use
-
In order to avoid accidents, use the
device only in accordance with its
WARNING
intended use.
®
communicator, etc.
®
communication and its parameters can
symbol.
EN
31
Werbung
Kapitel
Inhaltsverzeichnis
