Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
-
Appliance
-
Synthetic fur cover
-
Terry cover
-
Instruction manual
Functional description
The device is designed for waxing and
polishing or dewaxing of vehicle varnish.
Rotating the polishing disc helps achieve a
consistent mode of operation. The polish-
ing bonnets can be exchange for different
applications and detachable for cleaning.
Overview
1 Handle
2 ON / OFF switch
3 Polishing disc
4 Synthetic fur cover
5 Terry cover
6 Mains cable
Technical specifications
Car polisher ................PPM 120 A1
Rated input voltage
(U) ....................... 230-240 V~, 50 Hz
Power input (P) ............................ 120 W
Idling speed (n
) ......................3700 min
0
Safety class .....................................
Protection category...........................IPX0
Weight ......................... approx. 2,35 kg
Sound pressure level
(L
) ....................... 61,7 dB; K
pA
Sound power level (L
measured .............. 72,7 dB; K
guaranteed ............................... 76 dB
) .. 17,543 m/s
Vibration (a
h
= 3 dB
pA
)
WA
= 3 dB
WA
; K= 1,5 m/s
2
Levels of noise and vibration were deter-
mined according to the norms and regula-
tions in the declaration of conformity.
-
The specified total vibration values and
the stated noise emission values have
been measured according to a stand-
ardised test method and can be used to
compare one power tool with another.
-
The specified total vibration values and
the stated specified noise emission val-
ues can also be used for a provisional
assessment of the load.
Warning:
The vibration and noise emissions
may deviate from the specified val-
ues during actual use of the power
tool, depending on the type and
manner in which the power tool is
used – and in particular which type
of workpiece is processed.
Safety measures for protection of
the operator must be determined.
These are to be based on an esti-
mate of the actual vibration load
under the real operating conditions
(for this, all parts of the operating
cycle are to be taken into account,
for example, times in which the
power tool is turned off, and those
during which it is turned on but run-
ning without a load).
Notes on safety
-1
II
Caution! When using power tools,
observe the following basic safety
measures for the prevention of
electric shocks and the risk of injury
and fire.
Please read all these instructions
before using this electric tool and
please keep the safety instructions.
2
GB
MT
17
Werbung
