Parkside PPM 120 A1 Originalbetriebsanleitung Seite 16

GB MT
Content
Introduction ............................... 16
Intended purpose ....................... 16
General description .................... 16
Extent of the delivery .......................17
Functional description ......................17
Overview .......................................17
Technical specifications ............... 17
Notes on safety.......................... 17
Symbols and icons ..........................18
General Safety Directions
for Power Tools ...............................18
Further safety directions ...................20
Residual risks ..................................21
Operation .................................. 21
Tighten cover on the polishing disc ....21
Switching on and off .......................21
Waxing/polishing paint surfaces ......22
Dewaxing/polishing paint surfaces ...22
Cleaning and maintenance ......... 22
Cleaning ........................................22
Storage ...................................... 23
Waste disposal and
environmental protection ........... 23
Replacement parts /
Accessories ................................ 23
Guarantee ................................. 23
Repair Service ............................ 24
Service-Center ............................ 25
Importer .................................... 25
Translation of the original
EC declaration of conformity
Exploded Drawing
16
.... 178
................... 193
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a final inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain im-
portant information on safety, use and dis-
posal. Before using the product, familiarise
yourself with all of the operating and safe-
ty instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intended purpose
The device is designed for waxing and pol-
ishing or dewaxing of vehicle varnish.
The device is intended to be used by do-it-
yourselfers. It was not designed for heavy
commercial use.
The tool is to be used by adults. Children
over the age of 16 may not use the tool
except under supervision.
The manufacturer is not liable for damages
caused by an improper use or incorrect
operation of this device.
General description
See the front fold-out page for
illustrations.