Parkside PWS 125 H7 Originalbetriebsanleitung Seite 29

The device is intended for use by adults.
Children under the age of 16 may not use
the device, except under supervision.
Any other use that is not expressly permit-
ted in this instruction manual may pose
a serious hazard to the user and result in
damage to the device. The operator or
user of the machine is responsible for any
accidents or personal injury and/or mater-
ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Angle Grinder
• Additional handle
• Cutting disc: WA60 T BF (metal,
⌀ 125 mm × 1,2 mm)
• Guard cover, Attachment
• Chuck key
• 2 Spare carbon brushes
• Translation of the original instructions
Overview
The illustrations for the
device can be found on
the front and back fold-out
page.
1 Additional handle
2 Holder for additional handle
3 Speed regulator
4 Handle
5 On/Off switch
6 Service panel
7 Screw
8 Holder for additional handle
9 Cutting disc
10 Guard cover
11 Direction of rotation arrow
12 Spindle lock
13 Mains connection cable
14 Attachment
15 Lock (Attachment)
16 Spare carbon brushes
17 Chuck key
Fig. A
18 Clamping nut
19 Mounting flange
20 Uptake spindle
Fig. B
21 Release lever (Guard cover)
22 Notch
Fig. D
23 Groove for pressure spring
24 Carbon brush
25 Wire
26 Contact shoe
27 Pressure spring
28 Contact plug
Description of functions
The very fast rotating attachment tool en-
ables clean grinding, cutting or brushing
of metal.
Special attachment tools are provided for
each individual application. Please refer
to the information from the manufacturer.
Please refer to the descriptions below for
information on how the operating ele-
ments work.
GB MT
29