Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7 CQ-RD55LEN
|
Anti-Theft System
How to Remove
and Install the Unit
Removal:
1. Switch off the power.
2. Press the button and the handle lifts automaticaily. (Fig. 1,
0)
3. Remove
the unit from the bracket by pulling the handle
firmly. (Fig. 1, @)
Installation:
Insert and push the main unit fully into its bracket. The unit will
®® PRESS
be locked in automatically.
A "click" sound can be heard when the safety lock is engaged.
aution;
. It is dangerous to operate the unit with the safety lock released.
Thus, when operating the unit be sure the handle is in its original
down position, and always make sure the unit is fully pushed into
the mounting bracket.
. After operating the unit for several hours, it will become very hot
especially on the rear side. Please be aware of this and pay careful
attention.
_ The unit is not water-proof. Therefore, do not expose it to water nor
excessive moisture.
. Do not abuse the unit by hitting, dropping or swinging the unit while
carrying by its handle.
. For safety reasons, do not remove the unit from its mounting
bracket and avoid use of the presetting and programming function
while driving your Car.
aioe
Werbung
