Werbung
Verfügbare Sprachen
Verfügbare Sprachen
| CQ-RD55LEN
Radio Play Operations (Cont'd.) |
Preset Station Setting
Up to 24 stations can be preset in the station memory as follows;
AM(MW/L)
5 stations | 6 stations | 6 stations | 6 stations
1
Radio Frequency Indicator
T To select the desired band
Press this button to select FM1, FM2 or AM(MW/LW) mode.
2 To tune in the station you want to listen to.
You can tune in a desired station either by manual tuning or seek tuning.
3 Auto preset
Hold this button for more than 2 seconds. Up to 6 strongest stations along the frequency band (from the
strongest frequency to the next stronger frequency in sequential order) will automatically preset into six
preset buttons (1-6). Scan will immediately follow from preset number 1 as soon as the auto preset is
completed. Press the desired preset button (1-6) when reaching the desired station. This can be done
on any band.
Note
@ At TP mode, the most strongest traffic information broadcast is searched and tuned. (Not preset scan)
4 To memorize the station in the memory.
Press
one
of the preset buttons
for several
seconds.
Release
when
the band
indicator and
radio
frequency indicator blink once. The memory has been set.
Preset other stations on other bands in the same manner.
Note: If any of these station selectors
is accidentally
pressed
and
heid for several
seconds,
the
previously preset station will be erased; instead, a different station will be registered into that memory
circuit in which the band is playing.
Werbung
