Herunterladen Diese Seite drucken

cecotec BOLERO DRESSCODE 7000 DN Bedienungsanleitung Seite 6

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 55
SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the device.
Keep this instruction manual for future reference or new users.
- Ensure that the mains voltage matches the voltage specified
on the device rating label and that the plug is earthed.
- The installation of an earthed socket must be carried out
by a qualified electrician. Make sure that the electrical
installation complies with current regulations.
- If the power cord is damaged, it must be replaced by the
official Cecotec Technical Support Service or by a similarly
qualified person to prevent hazards.
- If the product is damaged, it must not be used. Contact the
official Cecotec Technical Support Service. Risk of electric
shock!
- Do not use an extension cord or multiple sockets.
- Do not use external switching devices such as timers.
- This appliance is for indoor use only.
- Make sure the device is installed in places where the
temperature is above 5ºC. Lower temperatures may cause
damage to internal components. If the device should freeze,
be sure to drain the water completely to avoid further
damage.
- In case of leaks or splashes of water, dry the device as soon
as possible.
- The device is not designed for built-in installation.
- Use the hose set supplied with the appliance. Do not reuse
old hoses.
- Check the hose connections and the tap to avoid problems
due to pressure changes. If the connections loosen or leak,
turn off the water tap. Do not operate the washer before the
hoses have been properly installed.
10
BOLERO DRESSCODE 7000 DN
- Do not remove the filter from the drain pump while there is
water left in the machine. Hot water spillage may occur.
- Before carrying out any maintenance in the device, unplug
the appliance from the mains.
- As a safety measure, we advise you to unplug the appliance
and cut the water supply after every use. Maximum water-
inlet pressure: 1 MPa. Minimum water-inlet pressure: 0.05
MPa.
- Use the new hoses supplied with the equipment.
- Never unplug the appliance with wet hands.
- Unplug the power cord before cleaning or repairing the
product.
- For safety reasons, the appliance must be properly earthed.
- Water channelling and electrical devices must be connected
by a qualified technician in accordance with the local and
national safety regulations specified by the manufacturer.
- The glass door may reach high temperatures during
operation. Keep children and pets away from the glass door.
- Do not use the device in rooms where water, moisture,
explosives, or caustic gases are present.
- If the room where the washing machine is located has
any type of device that generates fumes from the burning
of fuels, make sure that there is proper ventilation, as the
accumulation of these fumes may cause a fire hazard.
- Do not wash items that have been soiled with substances
such as cooking oil, acetone, alcohol, petrol, kerosene, spot
removers, turpentine, waxes, and wax removers.
- Items such as foam rubber, shower caps, waterproof textiles,
rubber backed articles, and clothes, or pillows fitted with
foam rubber pads should not be washed in the machine.
- Fabric softeners or similar products should be used as
specified by manufacturer.
11
BOLERO DRESSCODE 7000 DN

Werbung

loading